Home

PRI Fuel Treatment, Additive & Stabilizer that really works!! – at Go2marine

July 24, 2009

PRI Fuel Treatment, Additive & Stabilizer is available for both gasoline engines as PRI-G and diesel applications as PRI-D. The unique formula can be used in marine engines, RV’s and other fuel situations. With more than 40 years of research and usage, PRI, Power Research Inc is a product that accomplishes just three things for diesel and gasoline fuels (and by extension, in those engines):

1. PRI is a Fuel Stabilizer and Restorer.

2. PRI removes trapped moisture that modern fuels promote.

3. PRI reduces carbon particulate size.

Fuel Additives & Stabilizers by Power Research Inc.

Fuel Additives & Stabilizers by Power Research Inc.

 PRI is the industry leader at restoring old stale fuels. PRI can produce usable gasoline and diesel fuels from the worst storage conditions. Independent laboratory tests have tested 10-13 year old fuels that were restored with PRI and found them returned to usable condition. Treat just once a year for year after year use.

PRI will emulsify and absorb small amounts of water from fuel. While not able to clean water contaminated fuel that has large amounts of water, it does prevent alcohol phase separation. PRI prevents corrosion in the tank as well as everywhere fuel flows and contains asolutely no alcohol.

PRI reduces carbon buildup in small engines, reduces carbon in the exhaust and maintains the carbon size to less than .010 microns. Cleaner burning with less particulates means that engines stay clean on the inside as well as the outside.

PRI marginally increases the octane in gasoline and increases the cetane (diesel) rating by 1-2 points. PRI-D is suitable for diesel #1, diesel #2, kerosene, home heating oil, ULS diesel, marine diesel and marine gas oil. PRI-G is suitable for all octane ratings of gasoline. Although they are formulated for specific fuels, using PRI-D in a gasoline engine (or vice veras) will cause no harm.

Fuel Additives & Stabilizers by Power Research Inc.

Fuel Additives & Stabilizers by Power Research Inc.

Testimonials often have some value, but these unique testimonials will have you thinking that this ‘witches brew’ is one that deserves to be added to your current tank of fuel.

Diesel Smoke Control – Bob White with his 38′ Bertram “Island Time” had a problem. The real challenge was how to get two stroke 6-71 Detroit Diesels, which are known for their smoking, to stop being so dirty. PRI-D solves this problem because it works as a carbon breaker; it never allows clumps of carbon to form in the engine or exhaust larger than .010 microns. That means that smoke is far less visible and that the transom stays cleaner (and is easier to clean!). – Motorboating Magazine, May 2001.

Fresh Fuel – How old is your fuel? If your fuel is stored for longer than a season, it starts to degrade. Howard Freilich the owner of Qescorp Inc. had a unique problem. They run a recycling business, from saw blades to fuel – that’s right, fuel. Qescorp has tested PRI-G added to 15 year old fuel from salvage yards. One quart of PRI-G mixed well with 300 gallons of fuel, then left to stand for 48 hours resulted in a usable fuel that complies with the fuel specifications of all engine manufacturers. – New York Times Upfront, Summer 2007.

E-10 Fuel – Call it Gasohol or Ethanol mix / blend or just E10, it is here to stay. Ethanol is added to gas and it reduces dangerous emissions (good) and is hydroscopic (bad). Ethanol is so good at attracting moisture, like condensation, that when it gets saturated, it simple drops the water (which is called phase separation) which then sinks to the bottom of the tank while alcohol continues to attract more water! PRI-G is a non-alcohol fuel stabilizer (alcohol attracts water!) that functions as a carbon dispersant as well. It keeps outboards running clean. – Boat Digest

‘Servicing’ Older OutboardsPRI-G is essential to maintaining your older outboard in “just serviced” condition. After electrical issues, fuel is a close second. When added to your tank and run through the outboard, PRI-G can make a noticable difference in smooth running and will preserve the parts that the fuel runs through; the carb and fuel pump. When you service your engine, service your fuel! – Motorboating Magazine, January 2002.

Keeping Out The Water – Because “future fuels” like E-10 are here now, the choices of fuel additives has grown on the market. One of the most common (and affordable) component of fuel additives is alcohol. When added to fuel, alcohol makes the fuel burn cleaner, with a 1.5% loss in mpg. Alcohol has undesirable characteristics of being hydroscopic (attracting water) as well as being a potent solvent, additionally, most gas additives were designed for the automotive industry and are not for marine use.  – Saltwater Fly Fishing, Dec 2006/Jan 2007.

Diesel Fuel Oil – The Tennesse Valley Authority had a problem, a big problem; they had 1.8 million gallons of bad fuel. The PAD (Petroleum Administration for Defense) rating was a high of 17, making the fuel unusable. The fuel was fully treated with PRI-D and then retested. The fuel was now at a PAD of 3, fully meeting TVA specifications. – Recyclers Power Source.

Fuel Additives & Stabilizers by Power Research Inc. Outboard Gas – An outboard is only as good as it’s gas. Some fuels gum up quicker, some age faster and some build up more carbon. Adding PRI-G to your tank prevents gumming of the fuel, contamination of the carburetor and build-up of carbon that causes these small work horses to falter. Carbon build-up is a hidden killer of these engines. When too much carbon accumulates, the rings are pushed higher and higher (called “ring jacking”). The increased friction between the rings and cylinders causes elevated temperatures, accelerated wear and ultimately, power head failure. PRI-G dramatically reduces carbon build-up by reducing the size of the carbon cluster.  – Field and Stream, September 2000.

Go2marine carries PRI-D, PRI-G and PRI-OCIDE.

5 Responses to “PRI Fuel Treatment, Additive & Stabilizer that really works!! – at Go2marine”


  1. […] PRI reduces carbon buildup in small engines, reduces carbon in the exhaust and maintains the carbon size to less than .010 microns. Cleaner burning with less particulates means that engines stay clean on the inside as well as the outside. See more information on fuel treatment… […]

  2. richard eberhard Says:

    where do you purchase this product PRG-1?

  3. richard eberhard Says:

    where do you buy PRI-D?


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: