Home

The installed T-top boat cover keeps your boat clean and dry

Go2marine offers Taylor-Made T-top Center Console Boat Covers for boats with fixed position “T” tops. These boat covers are built to accommodate a wide range of vessels, from 17.5′ to 26.4′. There are two groups of T-top covers, those that fit boats with no bow rails to 6″ bow rails and another group for those with taller rails, from 6″ up to 18″ bow rails. If you are uncertain how to measure your boat, follow these simple measurement guidelines.

Fabric and Construction:

The semi-custom T-top boat cover is manufactured from 6 ounce Hot Shot with a 5 year limited warranty. Exclusive for Taylor-Made boat covers, engine covers and other fabric products, they are  now sewn together with Gore Tenara thread. The thread is resistant to UV sunlight, saltwater, chemicals, acid rain and harsh environments; in fact, Gore stands behind the Tenara thread and guarantees that it will outlast ANY fabric it is sewn with. From the Acrylic Coated Polyester to the strap buckles and straps, these covers are made to stand up to years of service.

Installation:

Unlike T-top boat covers of the past, this pattern allow for two major design improvements.

  • The cover is made in 2 sections that can be zipped together
  • The cover can be installed by just one person – without a ladder.
Get started by pulling on the bow section…

After removing the cover from the box, separate the front and the back sections. Place the bow section over the bow and pull the cover on until it reaches the center cockpit. You may need to work from side to side. Now do the same with the stern section, pulling it on until it reaches the center console. Standing on the deck, secure and zip down one side 1/2 way, then the other side. Pull the zipped cover up under the T-top and secure. Step off the boat and zip the cover the rest of the way down on both sides.

Secure the zipped portion of the boat cover down on each side. Once you are done with the zippers and securing the straps across the zipper, move to the bow. Install the trailer strap on the bow, then work towards the stern. Here are the Complete T-Top Coat Cover Installation Instructions.

The result is a fabric boat cover that keeps out the elements and protects your investment for years to come.