Home

For most people, there comes a time when the boat must be put away for the season, the cabin locked up and all is left to fend for itself through the slumber of the winter. In most locations, you will use a boat cover or store a small boat in open or unheated storage. Larger boats will be secured to the dock or hauled out and winterized. The number one thing that people complain about is the smell when you get back to the boat in the spring. Go2marine is here to offer you some understanding about what happens during the winter with moisture and what can be done to protect your boat.

If your boat is small, you should first get a boat cover to protect the topsides and interior from weather and reduce moisture coming in from the environment. If your boat is large, you will need to seal it up well; yet still supply some form of ventilation. The number one enemy of the interior of boats in the off season is moisture.

The Problem(s)Fungi

Fungus (Fungi) consist of molds, mildews, yeasts and more, in this unique Kingdom that is neither animal nor plant. Fungi are part of the natural environment and operate primarily by breaking down dead organic matter such as fallen leaves and dead trees. Indoors, fungus growth tries to break down dead matter (wood, cotton, rayon and other organic materials) as well as pseudo-organic materials (like foam, polyester). Fungi reproduce by many means, including tiny spores; the spores are invisible to the naked eye and float through outdoor and indoor air. The more commonly recognizable mold and mildew may begin growing indoors when mold spores land on surfaces that are wet. There are many types of mold, and few of them will grow without water or moisture. This Kingdom makes up the most diverse life on the planet with worldwide distribution and some 1.5 million species. Fungi also has the ability to become an allergen, irritant or significant pathogen to humans.

Fungi gradually destroy the things that they grow on. Ultimately Fungi thrive as a  result of a high level of moisture encouraging their growth; rather than trying to just treat the fungi to kill them, resolve the moisture issue to prevent the problem that encourages Fungi growth.

The Solutions

Requiring Power – For boats that are left within the reach of an extension cord or dock cord you can help keep moisture to a minimum with a number of heater or dehumidifier options.

GoldenRodGoldenRod Dehumidifiers offer inherent safety features like no fan, simple installation, constant heat output and simplicity. They eliminate dampness, mildew, condensation and humidity with size options for areas from 100 to 500 cubic feet.

XtremeExtreme (Xtreme) Heaters takes a higher tech, more active approach to keeping moisture in control. The XtremeHeater Boat Heater is a heating element that is self-regulated at a pre-set temperature and automatically varies its wattage in order to maintain that pre-set temperature.

Non-Powered – If you leave your boat and there is no means to power anything, you still have several options.

solar ventHard mounting vents are are installed in the cabin top or on hatches and used when leaving your vessel for the season, while it is uncovered but still weather-tite. The big news here is solar vents that have the advantage of a fan without leading power wires.

DriThere are a variety of moisture control devices that rely on a ‘salt’ like Calcium Chloride to draw moisture from the surrounding air and can be used in nearly any location, onboard or under cover. The most common of these is the Dri-Z-Air Dehumidifier.

vent and poleLastly, if you have a boat cover, a vent with support pole can help in any season with moisture control. This system is easily installed with a pair of scissors and your hands for a clean vent installation.

Dr. LED is not just another supplier of LED lighting, they are an innovator of LED lighting products.

Go2marine has introduced the Dr. LED line of lighting with several of the unique products offered. Dr. LED lights use patented “Constant Energy Technology” utilizing ultra efficient energy transfer from power sources to the LEDs. Power sources include: line voltage (120VAC, 240VAC), low voltage systems (12VAC, 24VAC), battery systems (12VDC, 24VDC, 28VDC), or alternative charging sources such as wind, solar panels, etc.

Dr. LED bulbs have active electronics built in to regulate the energy going into each LED, so that they do not overheat and/or burn out prematurely at the high end of the source voltage range, while maintaining an optimal level of light output for each given type of LED. As incandescent and halogen replacements, Dr. LED uses warm white lights (~3200 K), instead of the cold (~6000 K) LEDs more commonly used.

Dr. LED lights are also given names, for reasons that are logical as well as those of friends.

 A Surface Mounted Submersible LED Light, Underwater Lamp, named “Dave”.

Underwater Surface Mounted Submersible LED Light - Dave

Underwater Surface Mounted Submersible LED Light - Dave

Dave offers a waterproof LED light producing 400+ Lumen of light. Useful in the Engine Room (no risk of explosion), as  spreader light, in the cockpit or even below the waterline!

 

A Versatile Waterproof LED Light, Spreader Lamp, named “Kevin”.

Versatile Waterproof LED Light, Spreader Lamp, "Kevin"

Versatile Waterproof LED Light, Spreader Lamp, "Kevin"

Kevin is a bright, versatile waterproof lamp supplying 600+ Lumen. Outstanding light output from an energy saving LED fixture. Useful as a spreader light, tower light or anyplace you need ample light to work.

 

 Navigation Table Light, Navigation Chart w/ Red & White LED Lamp, named “Cobra”.

Navigation Table Light, Nav Chart LED Lamp, Cobra, Red & White

Navigation Table Light, Nav Chart LED Lamp, Cobra, Red & White

The Cobra is the world’s first and Only Bi-Color (Red/White) single high-Flux LED chart and reading light. This gooseneck chart light is a must for all navigational tables.

 

Edison Medium Screw Base LED Bulb, 12V/3W – 60 Watt equivalent, named “Sidekick”.

Edison Medium Screw Base LED Bulb, 3W, Sidekick

Edison Medium Screw Base LED Bulb, 3W, Sidekick

The Sidekick is a unique LED bulb in that it retains the usefulness of a conventional Edison medium base bulb (most standard light fixtures). The bulb gives off the warm glow of an incandelesent bulb while allowing the common ‘clip-on’ shades to still work.

Go2marines’s complete Dr. LED products

Common Features to all of Dr. LED light fixtures include:

Extremely rugged and ample heat sinking to the LEDs to ensure long life operation.
Multi-voltage 12VDC or 24VDC or 12VAC.
Works on most low voltage outdoor lighting systems.
Instant on, no warm-up of bulb needed.
Long service life, up to 50,000 hours.
Not hot – warm to the touch.
Shockproof, ultra-rugged with no filament to burn out or break.