Teleflex Control Cables

August 28, 2009

Go2marine carries a complete line of Teleflex control cables for most applications, including vintage Morse cables. Teleflex Incorporated is a diversified global company supplying research and goods to Medical, Aerospace, Commercial and the Marine market sectors.

Teleflex control cables are the current replacement for traditional Morse 33c cables that fit operational Morse controls. Whether you are outfitting the controls on an inboard or outboard, Telflex cables are the industry standard. Beyond the 33c control cables, there are cables for both Mercury / Mercuiser as well as 1979 and newer Johnson Evinrude. Control cables are available as either “General Controls Cables“, which will satisfy the needs of many boat operaters or the  “TFXTREME Control Cables” which are used on performance, commercial and military vessels.

General Controls Cables

  • Available in varies quality, from Standard to Supreme
  • 3300 / 33c fit Morse, Teleflex and many other manufacturers controls
  • Mercury, Mercuiser cables available for standard Mercury controls and Mercury Gen II
  • Johnson Evinrude cables fit 1979 to current, (adapter available for pre 1979)
  • Cables available in 1 foot increments
  • Quality built for most environmental applications
Teleflex General Control Cables from Go2marine

Teleflex General Control Cables from Go2marine

TFXTREME Controls Cables

  • Built to survive in the harshest environmental conditions
  • Unique splined core construction
  • Maximum performance with no lost motion
  • Cables available in 1 foot increments
  • Excellent for long cable runs
  • Available for most 33c, Mercury / Mercuiser and Johnson Evinrude applications
TFXTREME Control Cables at Go2marine

TFXTREME Control Cables at Go2marine

How to measure your replacement cable

For all your Control Cable, Steering Cable and Marine needs; visit Go2marine

Wesmar Thrusters Stainless Steel Dual Prop

Wesmar Thrusters Stainless Steel Dual Prop

Wesmar Bow and Stern Thrusters are an all stainless steel design. A low maintenance design is assured with polished stainless props, stainless steel casings and stainless steel seal and bearing carriers. Wesmar’s Bow and Stern thrusters are designed for low maintenance with extremely rugged and reliable operation, more thrust from the motor horsepower, easy of retrofitting or upgrading as well as precise operator control.

Wesmar’s new line of all stainless steel double propeller bow and stern thrusters is based on over 40 years experience in the ocean. From luxury yachts to commercial fishing vessels, some working in midwinter Arctic and Antarctic waters, Wesmar has been manufacturing rugged, reliable bow and stern thrusters.


Wesmar Thrusters for Power Boats

Wesmar Thrusters for Power Boats

Wesmar’s Customer Satisfaction Report is available as a PDF. From mega yachts to work vessels to tour boats.

Wesmar Thrusters for Commercial Vessels

Wesmar Thrusters for Commercial Vessels

Wesmars counter rotating dual propeller thrusters design was invented by Wesmar. The counter rotating propellers provide 40% more thrust from the same tunnel and input power over a single propeller design.

Wesmar Thruster are available from Go2marine in Direct Drive DC and Hydraulic Drives. Special orders can be fitted with Proportional DC Drive, AC Electric Drive and fitted for Central Hydraulics.

Direct Drive DC Electronic – (6 to 12 inch Thrusters), Two motor sizes with standard solenoid switch on/off control.

Hydraulic Drive – with load sense pumps, piston motors, proportional control valves, high and low pressure filtering, various sensing devices and a variety of tanks to fit vessels space requirements.

Wesmar Thrusters are available from 5 to 350 Horsepower and from 6″ to 42″ propellers for vessels from 25 to 250+ feet. Custom orders are available. Contact Go2marine to discuss your application.